CORIMA
R02242050xx

Carbon wheel Disc C+ WS TT DX28" clincher

Shimano Center Lock® compatible

Data

  • 28" clincher rear
  • Shimano / SRAM Disc brake
  • Rim width : 26mm
  • Axle : Thru axle Ø12 x 142mm
  • Model : C+
  • Weight : 1255 g
  • Carbon weave : Satin mat 3K

Shipped with

  • Rim tape
  • Protection wheelbag
  • Valve extender

Refer to the table below for the tire pressures in relation to the section marked on the tyre.

Tire section
mm
max. pressure
(bar)
max. pressure
(psi)
23 7,8 113
24 7,5 109
25 7,3 106
26 7,0 102
27 6,8 99
28 6,6 95
29 6,3 92
31 6,1 88
31 5,8 85
32 5,6 81

Do not remove the tire with any metal tool.

The minimum tire section is 23 mm and the maximum 32 mm.

For comfort and performance we recommend fitting 23 mm section tires on our 22.6 mm wide rims and 25 mm section tires on our 26 mm wide rims.

The original CORIMA braided rim tape is mandatory. If it is damaged it must be the replaced.

CORIMA clincher wheels are not compatible with tubeless conversion kits.

Only tires with inner tubes are acceptable (except latex inner tubes).

Co2 cartridge inflation systems are only allowed if their flow rate is adjustable. Instant inflation cartridges are prohibited with CORIMA wheels.

If the tire manufacturer indicates a pressure lower than that in the table, use this lower value.